-
Sandpaper mandrels for use with your hobby rotary sander. Sandpaper is threaded through the mandrel and your rotary tool spins the mandrel to sand. 4 pieces included, in acrylic case.
- $ 6.95
$ 7.95- $ 6.95
- Unit price
- per
-
Madworks is proud to introduce a high quality gravity-feed dual-action airbrush suitable for all hobbyists! The 0.3 needle included is a workhorse for hobby painting. This airbrush is compatible with lacquer and acrylic based paints. Airbrush has a 9ml paint cup, PTFE seals for...
- $ 44.95
$ 54.95- $ 44.95
- Unit price
- per
-
Madworks Tungsten Steel Engraver Chisel. Handle is not included. High Ductility Steel material. This chisel is used for carving your own panel lines into plastic models. 1.5mm Chisel. Can use on Plastic, ABS, PVC, Polyester Resin, Epoxy Resin. Do not use this to scribe...
- $ 6.95
$ 8.95- $ 6.95
- Unit price
- per
-
These angled tweezers are useful for handling small parts and adding decals to your models. The edges are rounded to prevent scratching. Made from stainless steel with a black cationic finish for long life.
- $ 12.95
$ 9.95- $ 12.95
- Unit price
- per
-
The GameMaster Character Brush Set contains 3 brushes, each selected for a special purpose and combined they make a perfect starter selection for any painter. The brushes have triangular handles for maximum comfort and perfect control. From fine detail to big coats and drybrushing...
- $ 12.95
$ 16.50- $ 12.95
- Unit price
- per
-
2.1/2.2/2.3/2.4/2.6/2.7/2.8/2.9mm Set of 8 bits. Compatible for Pin Vise. To avoid breakage, do not push this product when you spin it to make a hole, please let it use it's weight.
- $ 26.30
$ 26.95- $ 26.30
- Unit price
- per
-
1/1.5/2/2.5/3mm Set of 8 bits Compatible blade for Pin Vise. To avoid breakage, do not push this product when you spin it to make a hole, please let it use it's weight.
- $ 39.40
$ 44.95- $ 39.40
- Unit price
- per
-
A tool set for drilling a hole with no need for a pilot hole Pin vise [3mm] blade set, efficiently make holes clean and straight. Five types of diameter 1 / 1.5 / 2 / 2.5 / 3mm Since a center pin is attached,...
- $ 65.60
$ 69.95- $ 65.60
- Unit price
- per
-
1.1/1.2/1.3/1.4/1.6/1.7/1.8/1.9mm Set of 8 bits Compatible blade for Pin Vise. To avoid breakage, do not push this product when you spin it to make a hole, please let it use it's weight.
- $ 27.10
$ 27.10- $ 27.10
- Unit price
- per
-
1/1.5/2/2.5/3mm Set of 8 bits Compatible blade for Pin Vise. To avoid breakage, do not push this product when you spin it to make a hole, please let it use it's weight.
- $ 39.40
$ 44.95- $ 39.40
- Unit price
- per
-
1.0/1.5/2.0/2.5/3.0mm Set of 5 bits Compatible for Pin Vise. To avoid breakage, do not push this product when you spin it to make a hole, please let it use it's weight.
- $ 19.10
$ 19.10- $ 19.10
- Unit price
- per
-
2.1/2.2/2.3/2.4/2.6/2.7/2.8/2.9mm Set of 8 bits. Compatible for Pin Vise. To avoid breakage, do not push this product when you spin it to make a hole, please let it use it's weight.
- $ 26.30
$ 26.95- $ 26.30
- Unit price
- per
-
Compared with the existing painting masking tapes for plastic models, this product is thinner and more elastic. Since it is thin, you can see the original pattern or the painted area on the part after sticking this tape on that, which helps you to...
- $ 2.79
$ 2.95- $ 2.79
- Unit price
- per
-
This is a tool for use in model assembly. This pin vice can be fitted with drill bits ranging from .1 - 3.2mm in diameter. Bits are sold separately.
- $ 43.80
$ 43.80- $ 43.80
- Unit price
- per
-
3.175mm clamping handle to be used with hobby tools. Includes a cap to cover sharp tools after use. Compatible with shank diameter of up to 3.175mm. Handle is made of aluminum alloy and brass and finished in red. Handle length is approximately 141mm (5.55")...
- $ 15.95
$ 16.95- $ 15.95
- Unit price
- per
-
This product is made of aluminum alloy, and is a sturdy and durable addition to your workbench. It is usually inevitable that at some point a model maker will overturn their glue bottle and cause damage to their workbench. This item is designed to...
- $ 18.95
$ 24.95- $ 18.95
- Unit price
- per
-
10 pieces of 400 grit sandpaper, as well as a self adhesive cutting template for use with your D400 Lateral Pen Sander from David Union. Each peice is 113mm x 70mm.
- $ 3.95
$ 3.95- $ 3.95
- Unit price
- per
-
Includes 3 different sized drill bits: 4mm, 5mm, and 6mm.
- $ 19.95
- $ 19.95
- Unit price
- per
-
Model Paint Brush for Miniature Paint Sets / Character Models.
- $ 6.00
$ 9.99- $ 6.00
- Unit price
- per
-
Gamemaster XPS foam is Ideal for terrain and scenery building due to its high density and ability to be cut into different shapes. The sheets are flexible enough that they can easily be bent around wooden structures. They also have a great surface for...
- $ 14.95
$ 19.95- $ 14.95
- Unit price
- per
SUBSCRIBE TO OUR NEWSLETTER
Get the latest updates on new products and upcoming sales.